LATAPOXY® 300 Epoxy Adhesive – High Strength

5 People watching this product now!

Payment Methods:

Payment Method Hanuman Builders

About Product

LATAPOXY® 300 Epoxy Adhesive is a high-performance, chemical-resistant, three-component epoxy thinset adhesive. Ideal for fixing tiles and stones on both interior and exterior surfaces, it is suitable for industrial, commercial, and residential areas where high chemical resistance is required.

Key Features

  • High Strength & Chemical Resistant: Ensures durable and long-lasting installations.
  • Non-Flammable & Water Cleanable: Safe and easy to clean when fresh.
  • Prevents Curling: Perfect for moisture-sensitive marbles and agglomerated tiles & stones.
  • Versatile Bonding: Bonds to various substrates including metals, concrete, wood, and more.
  • Compliance: Meets EN/ISO standards with R2T classification and ANSI A 118.3, IS 15477 Type 5T Adhesive.

Suitable Substrates

  • Concrete (VDF, Tremix, MIVON)
  • Concrete Masonry & Brick Masonry
  • Cement Mortar Beds & Plaster
  • Metal Floors and Walls
  • Tile and Stone
  • Wood & Plywood**
  • Cement Backer Board** & Gypsum Board**
  • Cement Terrazzo
  • Engineered Stones & Marbles
  • Epoxy Resin Based Substrates
  • Rubber, PVC, and Linoleum Substrates (**Consult the backer board manufacturer’s data sheet for specific recommendations and load-bearing capacity.)

Application Areas

Designed especially for interior and exterior floor and wall installations of all types of ceramic tile, vitreous, semi-vitreous tile, glass mosaic tiles, precast terrazzo, engineered stone, metal tiles, and natural stones over various substrates including metal and drywall boards.

Technical Data

Property Requirement Typical Values
Shear Adhesion Strength ≥ 2 N/mm² 10-13 N/mm²
Shear Adhesion after Water ≥ 2 N/mm² 10-13 N/mm²
Thermal Shock Resistance ≥ 2 N/mm² 8.5-12 N/mm²
Open Time after 20 minutes ≥ 0.50 N/mm² 3.0-4.0 N/mm²
Compressive Strength (ANSI) ≥ 3500 psi 8150 psi
Tensile Strength (ANSI) ≥ 1000 psi 1800-2700 psi
Shear Bond Strength ≥ 1000 psi 1200-1450 psi

Chemical Resistance

Reagent Intermittent* Constant**
Citric Acid 10% R R
Sulfuric Acid 10% R R
Hydrochloric Acid 10% R R
Lactic Acid 5% R R
Vinegar R R
Acetic Acid 10% R NR
Nitric Acid 10% R R
Sodium Hydroxide 10% R R
Sodium Chloride 10% R R
Concentrated Detergents R NR
Ammonium Hydroxide R R
Sugars R R
Gasoline R NR
Cooking Oils R R
Turpentine R R
Mineral Spirits R R
Toluene NR NR
Xylol NR NR
(*Intermittent is less than 3 days exposure. **Constant is 1-month exposure)

Installation Guide

  • Surface Preparation: Ensure surfaces are clean, sound, and free of contaminants. New concrete should be cured for at least 28 days.
  • Mixing: Mix parts A and B until smooth, then add part C powder slowly and mix until uniform.
  • Application: Apply with a notched trowel, ensuring full coverage. Place tiles into wet adhesive and adjust as needed.

Order Now

Ready to enhance your next project with LATAPOXY® 300 Epoxy Adhesive? Order now from Hanuman Builders and experience the strength and reliability of high-quality epoxy adhesive. For bulk orders or special requests, contact us directly.

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “LATAPOXY® 300 Epoxy Adhesive – High Strength”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5